Cronus Zen multiple controllers setups come up in two common scenarios: switching between different controllers on the same Zen depending on the session, or setting up separate Zen units for squad play where multiple people want Peak's mods active at once. Both are straightforward, but each has its own considerations worth knowing before you dive in.
Switching controllers on one Cronus Zen
A single Cronus Zen only supports one active controller connection at a time feeding into one console or PC session, so switching controllers just means unplugging one and connecting another, whether that's a wired swap or re-pairing a different Bluetooth controller. Since Peak runs at the controller-input level and is plug-and-play, mods don't need to be reconfigured when you swap controllers, though you may want to retest your shot timing since a different controller's stick sensitivity can feel slightly different.
Setting up Peak for squad play across multiple Zens
If your squad wants each player running Peak on their own console or PC, each person needs their own Cronus Zen device with the script flashed individually. There's no shared license across devices, so each Zen needs its own setup following the same process. The Cronus Zen NBA 2K27 setup guide covers that full flow for PS5, Xbox, and PC if your squad is on mixed platforms.
| Scenario | What's needed | Notes |
|---|---|---|
| Switching controllers on one Zen | Just the alternate controller | No reflash needed, mods stay active |
| Two people, two consoles, same squad | Separate Zen units, each flashed with Peak | Each device needs its own setup |
| Wired and wireless controllers on rotation | Both controller types compatible with Zen | Reconnect as needed, no settings reset required |
Disconnect the current controller
Unplug it from the Zen or clear its Bluetooth pairing if wireless.
Connect the new controller
Plug in via USB or pair over Bluetooth depending on the controller type.
Confirm input registers correctly
Test basic movement and shooting in a menu or practice mode before jumping into a real session.
Retest shooting timing if needed
Different controllers can have slightly different stick feel worth a quick recheck.
No per-controller configuration needed
Because Peak operates at the controller-input level, you don't need to reconfigure mod settings just because you switched controllers — though retesting shot timing is still a good habit.
Troubleshooting a controller that won't connect
If a newly connected controller isn't registering, it's worth ruling out cable or power issues before assuming it's a compatibility problem — see Cronus Zen USB power issues for that checklist. If you're deciding between wired and wireless for your rotation, Cronus Zen wired vs wireless breaks down the tradeoffs.
Pros
- + Switching controllers doesn't require reflashing or reconfiguring mods
- + Squad play with multiple Zens is straightforward once each device is set up individually
- + Both wired and wireless controllers work in rotation without issue
Cons
- − Each squad member needs their own Cronus Zen device and setup
- − Different controllers can feel slightly different, so a quick retest is worth doing
Frequently asked questions
Can one Cronus Zen support two controllers at once?
No, a single Zen supports one active controller connection at a time feeding into one session.
Do I need to reconfigure Peak when I switch controllers?
No, since Peak runs at the controller-input level, mods stay active without needing reconfiguration.
Can my whole squad use Peak at once?
Yes, but each person needs their own Cronus Zen device with the script flashed individually.
Does switching controllers affect shot timing?
It can slightly, since different controllers have different stick feel, so a quick retest is worth doing.
What if a new controller won't connect to my Zen?
Rule out cable or power issues first, then check controller compatibility if the problem continues.